Motorola Solutions Deploy WLAN Solutions 認定 MSC-122 試験問題:
1. You just received a call from a WLAN customer who explained that he is having problems downloading files and streaming video. In diagnosing and troubleshooting this issue, which of the following would be the BEST action to take?
A) Perform a non-associative site survey and analyze RF energy levels.
B) Perform an active site survey and analyze continuous data streams.
C) Perform a spectrum analysis to review data packets and interfering frequencies.
D) Perform a passive site survey and analyze RF energy levels.
2. WiNG 5 groups sets of related parameters into configuration sets that may be assigned to multiple network elements or components. There are five types of configuration sets: RF Domain, WLAN, Device, Profile, and Policy. Under which of these configuration sets would you assign the country code for an RFS controller?
A) WLAN
B) RF Domain
C) Profile
D) Device
E) Policy
3. You are working on a new WiNG 5 deployment and need to install AP-7131s and RFS
series controllers. The vendor specific DHCP options required for automatic independent AP adoption of an AP-7131 to an RFS series controller are?
A) DHCP Options 189 & 192
B) DHCP Options 180 or 191
C) DHCP Options 145 & 126
D) DHCP Options 189 or 191
4. You have deployed and configured an AP7131 dual radio to operate with 40 MHz channels in the UNII-2 band. You have also configured the AP to use WPA2-CCMP encryption with PSK authentication. To make sure that you have configured the security options correctly you capture traffic using a protocol analyzer. When you view the individual frames you notice that most of them are completely readable in a plain text form, and even the ones that appear to be encrypted show a great deal of plain text information when the frame is opened and viewed in the protocol analyzer. Which of the following best explains this situation?
A) Encryption has been misconfigured
B) Management MPDUs are only partially encrypted
C) Only Data MSDUs are encrypted
D) The UNII-2 band is never encrypted since it is unlicensed
E) Only Control MPDUs are encrypted
5. You are configuring two RFS7000 switches as a Primary and Redundant pair. On the Primary switch you notice that the System Status 2 LED on the Primary switch is Green Solid and the System Status 2 LED on the redundant switch is Amber Blinking. Which of the following best describes the current state of your installation? Please use the Status exhibit at the bottom.
A) If your Primary RFS7000 controller fails your redundant RFS7000 controller will need to be rebooted before it will work
B) System is configured and installed correctly
C) Your Primary RFS7000 controller may not have the country code set correctly
D) The configuration on your redundant controller must be corrected before the system will work as designed
E) You will need to connect a Cat5 cable between the Primary and Redundant controllers before failover will work
質問と回答:
質問 # 1 正解: B | 質問 # 2 正解: B | 質問 # 3 正解: D | 質問 # 4 正解: C | 質問 # 5 正解: D |